​IPCO Power is agent for Zelentech Watercut meters and Water in oil monitors.

Watercut analyzers

The ZelenTech ZT-100 Watercut Monitor determines the percent watercut in an oil or fuel emulsion without requiring the physical separation of the fluids. The emulsion stream is continuously monitored for capacitance and converted into percentage of water by the Watercut Monitor logic.

​The Zelentech Watercut meter measures water in oil primarily in crude oil and is used in applications like fiscal metering, desalting, export metering, process control, on test separators, on- and offloading, etc.

---

F-Series:

Flanged models:

• Slip-On Flanges or Weld Neck Flanges.
• ANSI, DIN or JIS Flanges
• Available from 4 inch to 48 inch
• Compatible with any Piping Specification

S-Series:

Threaded or flanged models:

• Slip-On Flanges or Weld Neck Flanges.
• ANSI, DIN or JIS Flanges
• Flange sizes from 1 inch to 8 inch
• NPT, BSP, BSPT
• Threaded sizes from 1 inch to 3 inch

---

I-Series:

Flanged insertion models:

• Fits in 2 inch or 3 inch nozzles
• ANSI or DIN Flange
• Raised Face or RTJ Flange
• Insertion into lines from 12 inch to 48 inch
• Compatible with any Piping Specification
• Retractable 

T-Series:

3/4 inch NPT insertion model:

• Sits through elbows into 2 inch or 3 inch lines.
• Suits larger pipes using adaptors
• Quick and simple setup
• Compatible with existing 3/4 inch nozzles made for similar instrument designs
• Compatible with any Piping Specification
• Retractable

---

Water in oil analyzers

ZelenTech ZT100 Water In Oil Monitors are designed to detect water contamination in virtually any kind of oil or fuel. It works with diesel, heavy fuel oil, engine lubrication oil, gear box oil, hydraulic oil, turbine oil, vegetable oils and many more.
​
The ZelenTech ZT100 Water In Oil Monitors comes in where water content levels are, or can be expected to, exceed saturation levels and therefore renders Saturation Meters unusable. With a ZT-100 you can measure way beyond the saturation point of the oil. ZelenTech ZT-100 Water In Oil Monitors are excellent for monitoring lubrication and hydraulic systems in heavy machinery and ships.

​For example the ZelenTech ZT100 Water In Oil Monitors can be used to monitor water removal efficiency of separators.

The ZT100, correctly installed with proper stream conditioning, can be expected to achieve the following accuracy:

• ± 0.01% up to 5% water cut
• ± 0.1% up to 5% and 10% water cut
• ± 0.2% between 10% and 25% water cut
• ± 0.5% between 25% and 50% water cut
• ± 1% between 50% and 100% water cut