
IPCO Power’s FID Recycler can be used as tank treatment to prevent issues with fuels, or as way to re-use sludge as fuel for boilers and incinerators.
IPCO Power's FID Recycler can also operate over a storage tank to prevent MGO, Fuel oil or Crude oil to have a bottom layer with sludge. Bad quality fuel can upset centrifuges and filters in bad weather conditions.
IPCO Power’s FID Recycler sets new standards in re-using any remaining sludge and waste oil. All installations operating on HFO produce sludge and waste oil, resulting in an expensive disposal problem. With the use of IPCO’S FID Recycler the current “waste stream” can now be converted to “fuel” to be used in boilers and incinerators. This “new” fuel will have the same efficiency as the conventional fuels typically used in HFO installations.
Specifications
System: Fuel Improvement Device (FID) Reducer, Vertical Homogenizer, with Magnetic motor coupling, Homogenizer is made from Aluminum 7075 T6 with special proprietary hard coat.
Pressure: Depending on requirements and capacity
Temperature: Min 90°C for HFO
Power supply: 400V@50 Hz / 460V@60Hz
Control Panel: 230V@50Hz / 250V@60Hz (Transformer in control panel)
Protection Class: IP54
Capacity and power: on request 1500 up to 12.000 l/h
Flange Connections: SAE Flange (counter SAE flange is supplied with system.)
Paint: RAL6018
Standard FID Recycler include the following components:
IPCO Power's FID Recycler can also operate over a storage tank to prevent MGO, Fuel oil or Crude oil to have a bottom layer with sludge. Bad quality fuel can upset centrifuges and filters in bad weather conditions.
IPCO Power’s FID Recycler sets new standards in re-using any remaining sludge and waste oil. All installations operating on HFO produce sludge and waste oil, resulting in an expensive disposal problem. With the use of IPCO’S FID Recycler the current “waste stream” can now be converted to “fuel” to be used in boilers and incinerators. This “new” fuel will have the same efficiency as the conventional fuels typically used in HFO installations.
Specifications
System: Fuel Improvement Device (FID) Reducer, Vertical Homogenizer, with Magnetic motor coupling, Homogenizer is made from Aluminum 7075 T6 with special proprietary hard coat.
Pressure: Depending on requirements and capacity
Temperature: Min 90°C for HFO
Power supply: 400V@50 Hz / 460V@60Hz
Control Panel: 230V@50Hz / 250V@60Hz (Transformer in control panel)
Protection Class: IP54
Capacity and power: on request 1500 up to 12.000 l/h
Flange Connections: SAE Flange (counter SAE flange is supplied with system.)
Paint: RAL6018
Standard FID Recycler include the following components:
- Fuel Improvement Device
- Electronic Cabine
- Frame
- 4 hrs Workshop Test
- 2 x Operating Manuals